Listen Port Gratisan di Linux menggunakan Polipo

1.install polipo lwt terminal/konsole dg printah sudo apt-get install polipo ato lwt synaptic n search polipo lalu klik kanan-mark for installation-apply

2.stelah terinstal,edit cobfig polipo dg cara ketik sudo gedit /etc/polipo/config n sama kan settingannya dg yg di bawah ini :

# Sample configuration file for Polipo. -*-sh-*-

# You should not need to edit this configuration file; all configuration
# variables have reasonable defaults.

# This file only contains some of the configuration variables; see the
# list given by ``polipo -v'' and the manual for more.


### Basic configuration
### *******************

# Uncomment one of these if you want to allow remote clients to
# connect:

# proxyAddress = "::0"        # both IPv4 and IPv6
proxyAddress = "0.0.0.0"    # IPv4 only

# If you are enabling 'proxyAddress' above, then you want to enable the
# 'allowedClients' variable to the address of your network, e.g.
allowedClients = 127.0.0.1
                                            
# allowedClients = 127.0.0.1              

# Uncomment this if you want your Polipo to identify itself by
# something else than the host name:

# proxyName = "polipo.example.org"

# Uncomment this if there's only one user using this instance of Polipo:

# cacheIsShared = false

# Uncomment this if you want to use a parent proxy:

parentProxy = "127.0.0.1:8118"

# Uncomment this if you want to use a parent SOCKS proxy:

# socksParentProxy = "localhost:9050"
# socksProxyType = socks5


### Memory
### ******

# Uncomment this if you want Polipo to use a ridiculously small amount
# of memory (a hundred C-64 worth or so):

# chunkHighMark = 819200
# objectHighMark = 128

# Uncomment this if you've got plenty of memory:

# chunkHighMark = 50331648
# objectHighMark = 16384


### On-disk data
### ************

# Uncomment this if you want to disable the on-disk cache:

# diskCacheRoot = ""

# Uncomment this if you want to put the on-disk cache in a
# non-standard location:

# diskCacheRoot = "~/.polipo-cache/"

# Uncomment this if you want to disable the local web server:

# localDocumentRoot = ""

# Uncomment this if you want to enable the pages under /polipo/index?
# and /polipo/servers?.  This is a serious privacy leak if your proxy
# is shared.

# disableIndexing = false
# disableServersList = false


### Domain Name System
### ******************

# Uncomment this if you want to contact IPv4 hosts only (and make DNS
# queries somewhat faster):

# dnsQueryIPv6 = no

# Uncomment this if you want Polipo to prefer IPv4 to IPv6 for
# double-stack hosts:

# dnsQueryIPv6 = reluctantly

# Uncomment this to disable Polipo's DNS resolver and use the system's
# default resolver instead.  If you do that, Polipo will freeze during
# every DNS query:

# dnsUseGethostbyname = yes


### HTTP
### ****

# Uncomment this if you want to enable detection of proxy loops.
# This will cause your hostname (or whatever you put into proxyName
# above) to be included in every request:

# disableVia=false

# Uncomment this if you want to slightly reduce the amount of
# information that you leak about yourself:

# censoredHeaders = from, accept-language
# censorReferer = maybe

# Uncomment this if you're paranoid.  This will break a lot of sites,
# though:

# censoredHeaders = set-cookie, cookie, cookie2, from, accept-language
# censorReferer = true

# Uncomment this if you want to use Poor Man's Multiplexing; increase
# the sizes if you're on a fast line.  They should each amount to a few
# seconds' worth of transfer; if pmmSize is small, you'll want
# pmmFirstSize to be larger.

# Note that PMM is somewhat unreliable.

# pmmFirstSize = 16384
# pmmSize = 8192

# Uncomment this if your user-agent does something reasonable with
# Warning headers (most don't):

# relaxTransparency = maybe

# Uncomment this if you never want to revalidate instances for which
# data is available (this is not a good idea):

# relaxTransparency = yes

# Uncomment this if you have no network:

# proxyOffline = yes

# Uncomment this if you want to avoid revalidating instances with a
# Vary header (this is not a good idea):

# mindlesslyCacheVary = true

3.perhatikan yg di rubah hanya 3 bagian ini dg menghilangkan tanda # dan sdikit menghapus bagian allowed clients :
proxyAddress = "0.0.0.0"    # IPv4 only
allowedClients = 127.0.0.1 (bagian ini sy apus krna sy hnya butuh client localhost biar bs kforward kprivoxy)
parentProxy = "127.0.0.1:8118"

4.save,lalu jalankan polipo dg cara ketik dterminal/konsole : /etc/init.d/polipo start biar polipo jalan,minimise terminal/konsole.

5.setting broser ke 127.0.0.1 port 8123

6.selamat berselancar n smoga makin wusss;)

N.B :

jalankan privoxy dl sblum jalanin polipo krna polipo dforward kprivoxy,kl mo forward polipo k susu jg bs tinggal ubah bagian 127.0.0.1:8118 dg port punya susu yaitu 9666.

"jangan lupa jalankan printah /etc/init.d/polipo stop stelah gak mo brosing lg ato udah gak mo konek lg,krna kl gak polipo akan trus aktif"

thx buat TG member dr roronoa pemburu bajak laut:ckaka: